Why Hot Carbonation?

Hot Water extraction can be (if done properly) one of the most effective and thorough methods of carpet cleaning without leaving your carpets soaking wet. Our Chem-Dry Powerbase machines ensure that the maximum amount of water is extracted from your carpet during cleaning so that your carpet is dry in hours not days!

You will hardly believe your eyes when Chem-Dry Carpet Solutions brings back the colour and life to your carpets and furniture. When you see the difference, you can see how Chem-Dry became the world's favourite carpet cleaning company. You'll also see why they are recommended by carpet and upholstery manufacturers world-wide and why major insurance companies refer people to Chem-Dry Carpet Solutions.

When Chem-Dry's patented Carbonating Cleaner is applied to your carpet or upholstery, using a low pressure applicator, our patented equipment applies millions of microscopic carbonated bubbles into your carpet. These work to lift the dirt and grime to the surface to be swept away forever. This process leaves your carpet in a drier and cleaner and healthier state.

Our products have been independently tested by CAMRASO in the United Kingdom. Their tests proved that carpets cleaned by Chem-Dry Carpet Solutions stay cleaner for longer than when they were newly laid.

Unlike the Chem-Dry process, steam cleaning frequently uses high pressure that forces water down through the carpet backing straight to the pad. This leads to buckets of water that can be left behind trapping soapy, dirt-attracting residue deeply imbedded in your carpet, creating the risk of reappearing spots and a potential breeding ground for mould and bacteria.

Step 1

Assesment by technician with client of all cleaning areas and concerns so the most effective method can be used to ensure the best end result.

Step 2

Carpet is thoroughly vacuumed to assist in initial soil release and open pile for pre-spraying.

Step 3

Pre-spraying of biodegradable Carbonated Traffic Lane solution with double passing in heavy traffic areas to assist in additional soil “lift”.

Step 4

Carpet is either brush or rake agitated to loosen all soiling and dirt in carpet pile ready for extraction.

Step 5

Spot treatment solutions are applied to stubborn spots to assist in removing these marks during cleaning.

Step 6

Carpet is thoroughly hot water extracted using our famous “Carbonation Process”.

Step 7

“The Natural III carbonation” rinse is applied during cleaning to remove any trace of residue to leave carpets “squeaky clean”.

Step 8

Deodoriser applied to leave your carpets smelling fresh.

Step 9

Carpet is raked and groomed to leave pile open for fast drying.

There is no other Hot water extraction cleaning method as effective and thorough as our multi stage cleaning system.